To Improve Reproducibility Of Red Seal Color - Toshiba e-Studio6506AC Imaging Manual

2.22 To Improve Reproducibility of Red Seal Color

Before adjustment
 Explanation
When an original containing a red seal is copied, users can select the Red Seal Color as the original mode. Use
this mode if the reproducibility of red seal color copied under the default copy settings is insufficient.
 Procedures
(1) Select [08 SETTING MODE]. Change the value for code [7610] to "1".
(2) Press [BASIC] on the control panel in the normal mode. Select "RED SEAL COLOR" among the
original modes.
After selecting "RED SEAL COLOR", make a copy and check its image quality.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
2. Copier-specific Adjustments
After adjustment
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-83