3. Printer-specific Adjustments
3.5 To Maintain a Uniform Gray Hue
(To maintain Consistency in Gray among Text, Photos and
Graphics)
Before adjustment
How gray is reproduced varies depending on
the type of original. As a result, there are
variations in gray.
Explanation
For printing, only the K toner is usually used to reproduce gray areas of drawing data, lines and text. On the
other hand, all color toners (C, M, Y and K) are used to reproduce gray areas of image data, such as BMP, GIF,
JPEG and TIFF. This provides a deeper gray on the printouts. Change the option on the printer driver, in order
to maintain consistency in the gray hue between the drawing data and the image data.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Photo area
Text area
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-18
After adjustment
All color toners are used to reproduce gray.
As a result, consistency is maintained in the
gray hue.
Photo area
Text area