Toshiba e-Studio6506AC Imaging Manual page 180

3. Printer-specific Adjustments
 Procedures
* Both the service technicians and the users can perform step (1).
* Only the service technicians can perform step (2).
(1) Change the setting of the sharpness in the printer driver.
For Windows
PCL6 PS3 XPS
Open the property page of the printer driver. Click [Setting] in the "Image Quality" tab.
Uncheck the "Use Sharpness Filter" checkbox in the "Image Attribute" tab. To make a smoother image,
check its checkbox and then set the value within a range of "-1" to "-4."
• Setting "-4" provides the smoothest (softest) print image.
The value "OFF" of sharpness intensity adjustment is positioned as shown below.
* Sharpness adjustment is not available when 1200 dpi is selected for PS3 printer driver.
e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-44