Toshiba e-Studio6506AC Imaging Manual page 126

2. Copier-specific Adjustments
(2) Press [USER FUNCTIONS] on the Control Panel. Then press [+] or [-] of [OMIT BLANK PAGE
ADJUSTMENT].
(3) Select [05 ADJUSTMENT MODE]. Change the value for the code [7618] to adjust the threshold for
judging the original as blank pages.
• The larger the setting value is, the more the original tends to be judged as a blank page.
[05] code Recommended value
05-7618 Set a value larger than 128.
* Set the value in increments of approximately 15 until the optimum value is obtained, while checking if
proper originals are judged as a blank page.
 Caution after the adjustment
• When the threshold for judging blank pages is changed, the same threshold for in the network scanning
function is also changed.
• Originals with a small portion of small letters may be judged as a blank page. Therefore adjust the value
carefully while checking the copy image.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Acceptable range value
0~255
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-80
Default
128