Toshiba e-Studio6506AC Imaging Manual page 224

3. Printer-specific Adjustments
PCL6 PS3 XPS
(1) Open the property page of the printer driver. Click [Setting] in the "Image Quality" tab.
Mark the "Use Black for All Text" checkbox in the "Basic" tab.
* This adjustment will be effective, only if a file created on a general application, such as Microsoft Office,
is printed in PostScript (PS3). It may not be effective, if a file created on a graphic application (e.g.
Illustrator) or a DTP application (e.g. QuarkXPress) is printed, or a PDF file created on these applications
is printed.
 Caution after the adjustment
Nothing in particular.
 Remarks
Not all colored text may be printed in black, depending on the type of text (e.g. text larger than 72 points).
e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-88