Toshiba e-Studio6506AC Imaging Manual page 187

PCL6 PS3 XPS
(3) Select [05 ADJUSTMENT MODE] and adjust the toner limit by setting a value smaller than the default for
[8070/8071/8090/8089].
Resolution Halftone
Smooth
600dpi
Detail
Smooth
1200dpi
Detail
* Set the value in increments of approximately 30, while checking the printouts until the optimum value is
obtained.
Subcode Original
0 Plain paper 1
1
2 Recycled paper
3
4
5
6
7
8
11 Envelope
12
 Caution after the adjustment
• The adjustment in procedure (1) may possibly provide insufficient photo contrast images. Therefore, carefully
perform the adjustment, while checking the printouts.
• The adjustment may possibly cause an increase in the amount of toner used, moiré, blurred text (blurring of
small and dark text), faint text (fine outlines of text shredded), diminished photo images or gradational images
(less accurate reproducibility of halftones), or in some consumption conditions, background fogging or a
decrease in the amount of developer material (carrier streaks). Therefore, carefully perform the adjustment,
while checking the printouts.
• The adjustment may possibly cause dark areas such as making shades on photo images look unnaturally faint.
Therefore, carefully perform the adjustment, while checking the printouts.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Mac * This adjustment will have an effect only on full-color printing.
[05]
Subcode
code
05-8071 0~8,11,12
05-8070 0~8,11,12
05-8090 0~8,11,12
05-8089 0~8,11,12
Thick
Thick 1
Thick 2
Thick 3
Thick 4
Special 1
Special 2
OHP
3. Printer-specific Adjustments
Recom
mended
value
Set a
value
smaller
than the
default.
Set a
value
smaller
than the
default.
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-51
Acceptable
value Default
range
0 to 255 128
0 to 255 128