Toshiba e-Studio6506AC Imaging Manual page 147

(2) Change the "Color Balance" option, the "Brightness" or "Saturation" option on the printer driver.
For Windows
PCL6 PS3 XPS
Open the property page of the printer driver. Click [Image Type Quality] in the "Image Quality" tab.
Change the option in the "Color Balance" or "Image Attribute" tab.
* Initially, change the value by 4 steps, while checking the printouts until the optimum value is obtained.
• "Color Balance" tab: Change the "All Colors" or "Each Color" option
• "Image Attribute" tab: Change the "Brightness" or "Saturation" option.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
* This adjustment will have an effect only on Auto or Color mode printing.
3-11
3. Printer-specific Adjustments
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved