Toshiba e-Studio6506AC Imaging Manual page 239

 Procedures
* The service technician must perform all adjustments.
PCL6 PS3 XPS
(1) Select [05 ADJUSTMENT MODE]. Decrease the values for codes [8070/8071] or [8089/8090] to reduce
the limit value of the maximum amount of toner used.
• Adjust the value for [05] code corresponding to the print option to be applied (Paper type and Halftone).
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
Resolution Halftone
Smooth
600dpi
Detail
Smooth
1200dpi
Detail
* Set the value in increments of approximately 30, while checking the printouts until the optimum value is
obtained.
Subcode Paper type
0 Plain paper
1 Thick
2 Recycled paper
3 Thick 1
4 Thick 2
5 Thick 3
6 Thick 4
7 Special 1
8 Special 2
11 Envelope
12 OHP
 Caution after the adjustment
The adjustment may possibly cause dark areas such as shades on photo images to look unnaturally faint.
Therefore, carefully perform the adjustment, while checking the printouts.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
* This adjustment will have an effect only on Auto or Color mode printing.
Mac
[05]
Subcode
Code
05-8071 0~8,11,12
05-8070 0~8,11,12
05-8090 0~8,11,12
05-8089 0~8,11,12
3-103
3. Printer-specific Adjustments
Recom Acceptable
mended
value
Set a
value
smaller
than the
default.
Set a
value
smaller
than the
default.
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
value Default
range
0 to 255 128
0 to 255 128