3. Printer-specific Adjustments
Procedures
* Perform the adjustment in accordance with the procedure below.
* Both the service technicians and the users can perform step (1).
* Only the service technicians can perform step (2).
(1) Change the "Sharpness" option on the printer driver.
For Windows
PCL6
PS3
XPS
Open the property page of the printer driver. Click [Setting] in the "Image Quality" tab.
Set the value for "Sharpness" within a range of "1" to "4" in the "Image Attribute" tab.
• Setting "4" provides the sharpest print image.
* Sharpness adjustment is not available when 1200 dpi is selected for PS3 printer driver.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
* This adjustment will have an effect only on Auto or Color mode printing.
3-36
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved