Toshiba e-Studio6506AC Imaging Manual page 42

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
Pattern B for out-of-registration colors
Paper feeding direction
(7) Finely adjust the rotating speed of the fuser motor, in accordance with a pattern for the out-of-registration colors.
•Use steps (a) to (b) to perform the adjustment.
(a) Select code [4529]. Finely adjust the rotating speed of the fuser motor.
• Adjust the values in accordance with a pattern for the out-of-registration colors as shown in the table
below.
Pattern for
out-of-
registration
colors
Pattern A
Pattern B
(b) Select code [104], and then press [TEST PRINT]. Check all the patches on the second page of the
printed test print pattern to check whether the misaligned colors have been improved.
e-STUDIO5506AC/6506AC/7506AC (Ver01)
Patch eliminated at
the leading edge
[05] code Subcode
05-4529 4
Paper feeding speed
slower than
rotating speed
Recommended value
123 to 127
(Set a value smaller than the
current value)
129 to 133
(Set a value larger than the
current value)
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
1 - 26
transfer belt
Acceptable
Default
value range
0 to 255 128