10.5
Parameter Setting
Set the following parameters to perform communications using a fixed buffer.
• Basic setting (
• Ethernet operation setting (
• Open setting (
Item
Fixed Buffer
Fixed Buffer Communication
Procedure
Pairing Open
Existence Confirmation
Page 64, Section 7.1.2)
Page 65, Section 7.1.3)
Page 67, Section 7.1.4)
Select whether to use the fixed buffer for connection with the connected
device for sending or receiving.
Select the communication method for communications using a fixed buffer.
Select whether to disable or enable the pairing open for communications using
a fixed buffer. (
Page 105, Section 10.7)
Select whether or not to use the alive check function. (
Section 12.6)
Select "No Confirm" to send data by broadcast communications during "No
Procedure" communications using a fixed buffer.
CHAPTER 10 COMMUNICATIONS USING A FIXED BUFFER
Description
Page 153,
Setting range
• Send
• Receive
• Procedure Exist
• No Procedure
• Disable
• Enable
• No Confirm
• Confirm
97
10