Parameter Settings - Mitsubishi Melsec-L Series User Manual

12.3.6

Parameter settings

The remote password setting of the E71 is described.
Project window
Password Setting
Remote
Password
Password Active
Setting
Module Setting
User Connection
*1*3
No.
Remote
Password
Detail
System
Setting
*2
Connection
*1 The user connection is used to perform MC protocol communications and fixed buffer communications.
*2 The system connection is used in the system to perform FTP communications and MELSOFT communications (TCP/IP,
UDP/IP).
*3 When "MELSOFT Connection" has been selected in the open setting, select the MELSOFT application communication
port in "System Connection". MELSOFT connection is performed to the MELSOFT application communication port of
the system connection, not of the user connection. If the MELSOFT application communication port is not selected in
"System Connection", a window for a password does not appear.
148
[Parameter]
Item
Model Name
Start XY
Condition
Connection 1 to Connection 16
Auto Open UDP Port
FTP Transmission Port (TCP/IP)
MELSOFT Application Transmission Port
(TCP/IP)
MELSOFT Application Transmission Port
(UDP/IP), Dedicated Instruction, CC-Link
IE, NET/10(H) Relay Transmission Port
HTTP Port, HTTP Protocol
[Remote Password]
Description
Enter a password set for the CPU module.
Select the module model that checks an
entered remote password against the
remote password set for the CPU module.
Set the start address of the module that
checks an entered remote password.
Opens the "Remote Password Detail
Setting" window.
Specify a connection where an entered
remote password is checked.
Setting range
-
LJ71E71-100
0000 to 0FE0
H H
-
-