Parameter Setting - Mitsubishi MELSEC L Series User Manual

7.3

Parameter Setting

Set the parameters of each CH.
(1) Setting procedure
Open the "Parameter" dialog box.
1.
Start "Parameter"
Project window
Pull-down list type
Text box type
2.
Double-click the item to change the setting, and input the setting value.
• Items to input from the pull-down list
Double-click the item to set, to display the pull-down list. Select the item.
• Items to input from the text box
Double-click the item to set, and input the setting value.
3.
For setting CH2 to CH4, follow the operation of step2.
Basic setting D/A conversion enable/disable setting
Warning output setting
Warning Output Function
Warning output upper limit value
Warning output lower limit value
Scaling function
Scaling function
Scaling upper limit value
Scaling lower limit value
40
[Intelligent Function Module]
Item
module name
Setting value
0: Enable
1: Disable (default value)
0: Enable
1: Disable (default value)
-32768 to 32767 (default value: 0)
-32768 to 32767 (default value: 0)
0: Enable
1: Disable (default value)
-32000 to 32000 (default value: 0)
-32000 to 32000 (default value: 0)
"Parameter"
Reference
Page 49,
Section 8.1
Page 59,
Section 8.6
Page 54,
Section 8.5