Parameter Setting - Mitsubishi Melsec-L Series User Manual

11.3

Parameter Setting

Set the following parameters to perform communications using a random access buffer.
• Basic setting (
• Ethernet operation setting (
• Open setting (
Item
Fixed Buffer Communication
Procedure
CHAPTER 11 COMMUNICATIONS USING A RANDOM ACCESS BUFFER
Page 64, Section 7.1.2)
Page 65, Section 7.1.3)
Page 67, Section 7.1.4)
Select the communication method for communications using a fixed buffer.
Select "Procedure Exist" for communications using a random access buffer.
Description Setting range
Procedure Exist
123
11