Mitsubishi Melsec-L Series User Manual page 29

Item
Data size
Data transfer method
Subject
Attachment format
MIME
Data of attachment format
Transmission
Division of attachment
specifications
sending/receiving
data
When sending (encode)
When receiving (decode)
Encryption
Compression
Communications with a mail
server
Operation check mailer
*1 For the maximum segment length (a length between hubs), consult with the manufacturer of the switching hub used.
*2 This applies when a repeater hub is used. For the number of levels that can be constructed when a switching hub is
used, consult with the manufacturer of the switching hub used.
*3 If divided files are received, only the first file is received and the remaining files are discarded.
*4 If an e-mail is sent from a connected device to the programmable controller side, specify the encoding method
(Base64/7 bits/8 bits/Quoted Printable) of the attachment.
Attachment
Main text
When sending: Send either a file as attachment or main text (select one).
File name: XXXX.bin (binary), XXXX.asc (ASCII), XXXX.csv (CSV)
Specifications
LJ71E71-100
100BASE-TX
6k words × 1
960k words × 1
When receiving: Receive a file as attachment.
Us-ASCII format or ISO-2022-JP (Base64)
MIME format
Version 1.0
Can be selected from binary, ASCII, and CSV.
(CSV: Comma Separated Value)
Cannot be divided (Only one file can be sent/received.)
Subject: Base64/7 bits
Main text: 7 bits
Attachment: Base64
Subject: (Does not decode)
Main text: (Cannot be received)
Attached file: Base64/7 bits/8 bits/Quoted Printable
None
None
SMTP (sending server) Port number = 25,
POP3 (receiving server) Port number = 110
®
Microsoft Corporation Microsoft Office Outlook 2003
CHAPTER 3 SPECIFICATIONS
10BASE-T
*3
*4
27
3