Mitsubishi Melsec-L Series User Manual page 234

Error
code
C139
System error (The OS detected an error.)
H
The SMTP server is in process, and an error response
C13A
was received. (Exceeded the allocation of the memory
H
area)
The SMTP server is in process, and an error response
C13B
H
was received. (Illegal mailbox name)
C13C
System error (The OS detected an error.)
H
C140
The POP3 server could not be opened.
H
Communications cannot be performed with the POP3
C141
H
server. (Error response)
Communications cannot be performed with the POP3
C142
H
server. (Abort)
Communications cannot be performed with the POP3
C143
H
server. (Reset response)
A response from the POP3 server could not be
C144
H
received.
C145
Forcefully disconnected from the POP3 server
H
C146
The POP3 server could not be closed.
H
C147
Closing the POP3 server gave an error response.
H
C150
POP3 server verification error
H
The Ethernet module's mail address (e-mail setting
C151
parameter) is different from the account name in the
H
mailbox on the server side.
The Ethernet module's password (e-mail setting
C152
parameter) is different from the password on the server
H
side.
An error has occurred in acquisition of the received mail
C153
list. (The list of the mail that arrived at the POP3 server
H
failed to be acquired.)
232
Error description
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply module, and the
CPU module are properly connected.
(2) Check if the operating environment of the Ethernet module
conforms to the general specifications of the CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the manual for each
module.
If the actions above do not solve the problem, please consult your
local Mitsubishi representative.
• Check the status of the SMTP server.
• Check if the mail address of the Ethernet module has been
correctly set.
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply module, and the
CPU module are properly connected.
(2) Check if the operating environment of the Ethernet module
conforms to the general specifications of the CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the manual for each
module.
If the actions above do not solve the problem, please consult your
local Mitsubishi representative.
• Check that the port number of the POP3 server is 110. (The port
number of the Ethernet module is fixed to 110.)
• Check if communications with the POP3 server can be performed
using the PING command.
• Check if the POP3 server is busy.
• Check if the POP3 server is busy.
• Check if the POP3 server is busy.
• Check for an error in the POP3 server.
• Check if the network is heavily loaded.
• Check for an error in the POP3 server.
• Check for an error in the POP3 server.
• Check if the network is heavily loaded.
• Check for an error in the POP3 server.
• Check the status of the POP3 server.
• Check the account name of the mailbox on the server side and
correct the account of the mailbox set in the Ethernet module.
• Check the password on the server side and correct the password
of the Ethernet module.
• Reset the server inquiry time to the default value and restart the
CPU module of the own station.
Action