Mitsubishi Melsec-L Series User Manual page 233

Error
Error description
code
The communication channel is closed because the
C130
H
service is not available.
The SMTP server is in process, and an error response
C131
H
was received.
The SMTP server is in process, and an error response
C132
H
was received. (Local error)
The SMTP server is in process, and an error response
C133
H
was received. (Insufficient memory area)
C134
System error (The OS detected an error.)
H
C135
System error (The OS detected an error.)
H
C136
System error (The OS detected an error.)
H
C137
System error (The OS detected an error.)
H
The SMTP server is in process, and an error response
C138
H
was received. (Mailbox not found)
Action
• Check the status of the SMTP server.
• Check that a user name not registered in the server has not been
specified.
• Send the e-mail again after a certain period of time.
• Check the status of the SMTP server.
• Check the status of the SMTP server.
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply module, and the
CPU module are properly connected.
(2) Check if the operating environment of the Ethernet module
conforms to the general specifications of the CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the manual for each
module.
If the actions above do not solve the problem, please consult your
local Mitsubishi representative.
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply module, and the
CPU module are properly connected.
(2) Check if the operating environment of the Ethernet module
conforms to the general specifications of the CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the manual for each
module.
If the actions above do not solve the problem, please consult your
local Mitsubishi representative.
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply module, and the
CPU module are properly connected.
(2) Check if the operating environment of the Ethernet module
conforms to the general specifications of the CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the manual for each
module.
If the actions above do not solve the problem, please consult your
local Mitsubishi representative.
• Follow the procedure below.
(1) Check if the Ethernet module, the power supply module, and the
CPU module are properly connected.
(2) Check if the operating environment of the Ethernet module
conforms to the general specifications of the CPU module.
(3) Check if the power capacity is sufficient.
(4) Check if the hardware is normal according to the manual for each
module.
If the actions above do not solve the problem, please consult your
local Mitsubishi representative.
• Check if the mail address of the Ethernet module has been
correctly set.
CHAPTER 14 TROUBLESHOOTING
231
14