Mitsubishi Melsec-L Series User Manual page 257

Remark
This is a sample program for communications using connection numbers 1 and 2. When using another connection number,
specify the corresponding signals and bits.
(3) Precautions
(a) Buffer memory area settings
The following parameters operate according to the settings of the corresponding buffer memory areas
configured when a reinitialization process is performed. Therefore, do not change the settings of the buffer
memory areas.
• Timer setting of the initial setting
• Open setting
• Router relay parameter setting
• Station number <-> IP information setting
• FTP parameters setting
(b) Reinitialization process request
Do not request another reinitialization process while a reinitialization process is in progress.
APPENDICES
A
255