Mitsubishi Melsec-L Series User Manual page 16

Pages describing instructions are organized as shown below.
The following illustration is for explanation purpose only, and should not be referred to as an actual documentation.
Instruction
name
A device with is
applicable to
the instruction.
Descriptions
of setting data
and data type
• Instructions can be executed under the following conditions.
Any time
No symbol
• The following devices can be used.
*1
Bit
X, Y, M, L, F, V, B
*1 For bit data, a bit-specified word device can be used. For example,
specification of a word device. (The bit number is specified in hexadecimal.)
For example, the bit 10 of D0 is specified by
timer (ST), and counter (C).
14
During on
Internal device
Word
T, ST, C, D, W
On the rising edge
File register
R, ZR
Word device.Bit No.
. However, bit specification cannot be used for timer (T), retentive
D0.A
Execution condition of the instruction
Structure of the instruction
in the ladder mode
Setting side
User: A device value is set by the user.
System: A device value is set
by the CPU module.
During off On the falling edge
Constant
K, H
K, H
is used for the bit
$
$