Basic Parameters - Siemens SIMATRIX Programming Manual

3

Basic parameters

Siemens Building Technologies
Fire Safety & Security Products
This dialogue screen is used to set the basic system parameters.
As these basic parameters affect the contents of other dialogue screens, this is the
first place to start when setting parameters.
For example:
In the selection dialogue screens where you can select a camera or a monitor, only
those cameras or monitors entered in the Basic Parameters screen will appear in
the selection list.
Fig. 12 Basic parameters
Maximum number of system cameras
Enter the total number of cameras or inputs you intend to use in the system here.
When you activate the Transfer to all outputs option, the Image switching
parameters dialogue screen will display the same number of cameras for manual
switching.
Max. system monitors
As above, enter the number of all the outputs or monitors you intend to use here.
Basic parameters
23
06.2008