Siemens SIMATIC ET 200pro Quick Manual page 215

D.2 Identification number (ID no.), error codes
D.2.1 Identification number (ID no.)
The identification number (ID no.) provides unique identification of all the infor-
mation available in the motor starter (parameters, control commands, diagnosis,
commands, etc.). It is located in the data record tables in the left-hand column.
D.2.2 Error codes in the case of negative data record acknowledgment
Description
If a data record is rejected, an error code is sent with the negative acknowledg-
ment via both the device interface and the bus interface. This indicates the rea-
son for the negative acknowledgment.
The error codes correspond to the PROFIBUS DPV1 standard insofar as they
apply to the motor starters.
Evaluation via local device interface with Switch ES
The error codes are evaluated by the parameterization and diagnosis software
Switch ES (order no. 3ZS1 310-0CC20-0YA0) and displayed in plain text format.
You will more detailed information in the online help of Switch ES.
Evaluation via PROFIBUS-DP
The error codes are output via PROFIBUS-DP layer 2. More detailed information
can be found in the corresponding manuals in the PROFIBUS-DP protocol
description.
SIMATIC – ET 200pro motor starter
GWA 4NEB 950 5661-02 DS 04
Data formats and data records
D-3