Making Bags From Magic Vac Rolls - Magic Vac Jumbo Operating Manual

5 - Making bags from MAGIC VAC rolls

a) Unroll a bag of suitable length and cut it using the MAGIC Cutter
(15) as shown in fig. B, moving it from rim to rim. Now you can seal an
open side of the cut bag as follows:
b) Seal either of the two open ends of the bag by positioning it on the
sealing bar (11) with the smooth side facing up (fig. C).
Warning: be careful not to let the bag hang over into the vacuum
chamber (10) or on the sealing gasket (9); place the end flush with
the external part of the gasket, as shown in the figure.
c) Lower the Lid (5) by pressing on the Handle (6) (FIG. D1), and then
with your other hand engage it by rotating one of the two Knobs (7) in
the arrow direction LOCK (fig. D2) The Lid (5) must remain completely
lowered down. (fig. D3)
®
(15)
B
C
D1
D2
D3
25