Table of Contents
Advertisement
11.2 Messages of the software
11.2.1 Information messages
Code
8400
8401
8402
8403
8404
8407
8408
8411
8414
8801
8805
8806
8890
8891
System
9000
9002
9006
9016
9100
116
Description
Control panel has no valid program
for the DAC.
Control panel has no valid program
for the DAC.
Program in DAC is no longer current. Load the current program into the
DAC update failed.
Waiting for a DAC reset.
DAC program check is active.
DAC update succeeded.
Error in test pins/signal processing/
event processing/
memory wrapper/
list functions
Internal error
Reference run active
Machine head not locked
Quick-stop button is active.
Incorrect barcode ID
The counter has not reached the
preset value.
Troubleshooting
Troubleshooting
Load the current program into the
control panel from a USB key.
Load the current program into the
control panel from a USB key.
DAC.
• Attempt the update again
• Check cable connections
• Replace the DAC
Wait until the restart has been
performed
(Duration: several seconds).
Wait until the test has been performed
(Duration: several seconds).
• Switch off and on the machine
• Software update
• Notify DA Service
Lock the machine head
Release the Quick-stop button
Change the program
Tap the OK button. The counter is
reset.
Operating Instructions 911-210 - 04.0 - 11/2016
Advertisement
Table of Contents
