Cleaning The Filter Element - DURKOPP ADLER 911-210 Operating Instructions Manual

Maintenance
5. Tighten the drain screw (3).
6. Connect the machine to the compressed air supply.

7.3.3 Cleaning the filter element

Fig. 65: Cleaning the filter element
(1) - Filter element
(2) - Water separator
To clean the filter element:
1. Disconnect the machine from the compressed air supply.
2. Drain the water condensation ( p. 96).
3. Loosen the water separator (2).
4. Loosen the filter element (1).
5. Blow out the filter element (1) using a compressed air gun.
6. Wash out the filter tray using benzine.
7. Tighten the filter element (1).
8. Tighten the water separator (2).
9. Tighten the drain screw (3).
10. Connect the machine to the compressed air supply.
Operating Instructions 911-210 - 04.0 - 11/2016
NOTICE
Damage to the paintwork from solvent-based cleaners!
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter tray.
①
② ③
(3) - Drain screw
97