8. Press the bobbin winder flap (4) against the bobbin.
The winder starts and stops automatically when the configured bob-
4.9 Changing the bobbin
Fig. 12: Changing the bobbin (1)
(1) - Sewing material holder
(2) - Button for threading mode
To change the bobbin:
1. Remove the sewing material holder (1) (for alternating clamps only).
2. Press the threading mode (2) button.
The drive carriage moves to the bobbin change position.
26
bin filling volume is reached.
(Setting of the bobbin filling volume is described in the Service
Instructions.)
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch the machine to threading mode before
changing the bobbin.
①
The cover plate (3) pivots to the side.
The sewing feet are moved to the lower position.
The lighting is switched on.
②
③
(3) - Cover plate
Operating Instructions 911-210 - 04.0 - 11/2016
Operation