Table of Contents
Advertisement
Technical data
Technical features
Drive:
• Drive via positioning drive:
• The arm shaft is driven by a brushless DC motor
• Maximum speed depending on stitch length, sewing material thickness,
Programming:
• Operated via the graphic control panel OP 7000
• 99 program storage locations, each with a maximum of 16000 stitches
• Programs can be sewn individually or in sequences
• Storage of up to 20 sequences with up to 30 programs in each
• Setting of individual stitch parameters per stitch for controlling:
• Creation of seam programs via a Teach-In procedure
• Integrated test program for servicing/maintenance work:
Lubrication:
• Central oil wick lubrication system for machine head and hook
Sewing foot lift:
• Motorized sewing foot lift
Clamp opening:
• Pneumatic opening and closing of the clamps
Stitch length:
• Maximum stitch length: 12.7 mm
Operating Instructions 911-210 - 04.0 - 11/2016
In addition to the sewing drive, the DACIII control controls 2 stepper
motors for the X and Y motion for creating the seam geometry and a
Z axis for sewing foot adjustment.
application, clamp size and clamp weight
sequence
Stroke position of presser foot, thread cutter, thread clamp, speed,
thread tension, etc.
(accuracy of coordinate entries: 0.1 /1 mm)
• Monitoring of the sewing process
• Configuration of machine functions
• Testing of motor functions, inputs and outputs for reference
switches, valves and transport motors, RAM memory and EPROM
functions
123
Advertisement
Table of Contents
