Table of Contents
Advertisement
Menu bar (5)
The bar at the bottom contains the popup menus. This allows you to ac-
cess the various different menu items for creating and editing seam pro-
grams and for performing settings and tests on the machine. An arrow (1)
next to a menu entry indicates that tapping the entry will display further
subitems.
Fig. 18: Popup menu
(1) - Popup arrows
Button for repair mode (9)
The topmost button at the right side is used for switching the repair mode
on and off. The current status (
next to the button.
Display of the current seam parameters (8)
The current seam parameters are displayed below the repair mode button:
•
•
•
•
•
Information/Information/Informace
You can use the buttons Speed, Thread tension and Stitch length to
access the seam parameters directly ( p. 62).
34
①
Ein (On)
- Dimensions of the seam
- Speed
- Thread tension
- Stitch length
- Number of stitches / hook thread consumed
Programming
Aus (Off)
/
) is displayed
Operating Instructions 911-210 - 04.0 - 11/2016
Advertisement
Table of Contents
