Setup
Stands with own rollers (1) can be used for transporting the machine.
Stands without rollers must be transported with a lifting carriage or forklift.
Lifting the machine
Use a lifting carriage or forklift when lifting the machine for transport.
Transport on own stand rollers
The stand feet must be rotated upwards for transportation using the inte-
grated stand rollers.
Fig. 68: Transport on own stand rollers
①
③
②
(1) - Nut
(3) - Roller
(2) - Stand foot
Before transport
1. Loosen the nuts (1) on the stand feet (2).
2. Rotate the stand feet (2) fully upwards.
3. Tighten the nuts (1) so that the stand feet (2) remain upwards.
After transport
1. Loosen the nuts (1) on the stand feet (2).
Important
Rotate the stand feet (2) downwards so that the stand is supported evenly
and firmly on all 4 feet.
2. Tighten the nuts (1) on all 4 stand feet.
102
Operating Instructions 911-210 - 04.0 - 11/2016