Table of Contents
Advertisement
Programming
3. Tap the OK button.
The value is adopted and used for all seams until the machine is
5.7 Changing the bobbin
The machine automatically detects when the hook thread has been used
up and a new bobbin needs to be inserted.
In this case, or when a thread breakage occurs, the
behandeln (Manage Thread Breakage)
matically displayed.
Fig. 32: Changing the bobbin
To change the bobbin:
1. Tap the Spulenwechsel (Change Bobbin) button.
2. Change the bobbin ( p. 45).
3. Use the
4. Tap the Weiternähen (Continue Sewing) button.
The program jumps back to the start screen and sewing of the seam
Operating Instructions 911-210 - 04.0 - 11/2016
switched off.
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch the machine to threading mode before
changing the bobbin.
Vor (Forwards)
move to the point where sewing is to continue.
continues from the selected point.
Fadenriss
window is auto-
and
Zurück (Back)
buttons to
45
Advertisement
Table of Contents
