Table of Contents
Advertisement
Programming
Setting the stroke position
To set the stroke position:
1. In the menu item
The following options are displayed:
Operating Instructions 911-210 - 04.0 - 11/2016
No.
Meaning
S100
Sewing motor reference
S101
X-axis reference
S102
Y-axis reference
S103
Z-axis reference
Output elements
No.
Meaning
Y1
Foot mode
Y2
Bobbin cover
Y3
Needle cooling on
Y4
Right clamp
Y5
Left clamp
Y8
Stitch position optimization
Y9
Threading switch lamp on
Y10
Oil level indicator warning light on
Y25
Marking lamp 1 (Z)
Y26
Marking lamp 2 (Z)
Y27
Marking lamp 3 (Z)
Y28
Marking lamp 4 (Z)
Extras
Hublage einstellen (Set stroke position)
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do not reach into the machine when setting the
stroke position.
Switch off the power to the drives when you wish to
test the freedom of motion of the sewing foot rod.
>
Service
>
Multitest
tap the
option.
79
Advertisement
Table of Contents
