Programming
5
The control is operated via the operating terminal (1) located on the right
next to the machine head.
Information
The user interface of the OP7000 may deviate from the screen shots
Fig. 15: Operating terminal
(1) - Operating terminal
The screen is a touchscreen, i.e. the buttons are displayed on the screen
rather than provided as physical buttons. Buttons or functions are activat-
ed by tapping the corresponding position on the monitor.
Activating a button/selecting an element:
To select a button or activate an element:
1. Tap the corresponding button or element with your finger or a touch-
Operating Instructions 911-210 - 04.0 - 11/2016
Programming
shown as the software is constantly updated.
screen pen.
①
29