Table of Contents
Advertisement
Seam parameters for Teach-In
Drawing a path
7. Use the arrow buttons to move the cursor to the end point of the desired
Information
Alternatively, you can tap an arrow button once in order to define the
direction and then continue moving in this direction by pressing the pedal.
Important: Take care to ensure that the contour remains within the per-
missible sewing field of your particular sewing unit. Especially with curved
paths, you should remember that the start and end points are not directly
connected and that a curve is generated between these two points.
8. Tap the OK button.
The seam path is adopted with the specified parameters.
Adding further seam paths
You can now define all further seam paths in the same manner.
1. Add each new seam path by starting at step 4.
52
Button
Meaning
Speed
Stitch length
Thread tension
Stroke height
Cut thread
path.
Programming
Operating Instructions 911-210 - 04.0 - 11/2016
Advertisement
Table of Contents
