Table of Contents
Advertisement
Programming
5.3 Starting the software
After switching on the machine at the main switch the machine performs
a reference run. After this, the start screen is shown on the operating ter-
minal for a few seconds.
Fig. 16: Start screen
①
②
(1) - Language selection button
(2) - Multitest quick-access button
Here you can select the user interface language or use
Service
to
quickly access the
Multitest
menu.
Information
Both functions can also be accessed later from within the program via
Extras
Service
>
.
(See chapters Testing the functions of the machine ( p. 77)and
Changing the language ( p. 75))
If you do not tap any buttons, the software automatically switches to the
start screen after a few seconds.
The start screen
The start screen is displayed during sewing. When the machine is started,
the start screen is opened with the settings of the last sewing program
used.
32
Operating Instructions 911-210 - 04.0 - 11/2016
Advertisement
Table of Contents
