Table of Contents
Advertisement
Programming
Testing the functions of the machine
You can use the
check the inputs and outputs, test the sewing motor and set the stroke
position.
Fig. 50: Testing the functions of the machine
Information
The
Dürkopp Adler Service personnel.
Testing inputs and outputs
Important
The instructions only provide an overview of the test possibilities.
The tests may only be performed by qualified specialists that have
received training from Dürkopp Adler.
Operating Instructions 911-210 - 04.0 - 11/2016
Extras
Service
>
Feed clamps
function is only intended for use by
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do not reach into the machine during function
testing of inputs and outputs.
Multitest
>
menu item to
77
Advertisement
Table of Contents
