Switching The Lighting On/Off; Assistance Level Selection; Switching The Lighting Mode On/Off Interface; Push-Assistance Mode - Key-Disp KD51C-D User Manual

E-bike display

Hide thumbs Also See for KD51C-D:

Table of Contents

■ Push-assistance function may only be used when pushing the E-bike. Danger of

injury when the wheels of the E-bike do not have ground contact while use the

push-assistance function.

◆Switching the Lighting On/Off

To switch on the headlight, hold the "

automatically reduced. In the same way to press the "

be switched off.

Briefly press "+" or "-" button to switch the E-bike system assistance level, change the

motor output power, The default assistance level ranges from level "0" to level "5" , The

output power is zero on Level "0". Level "1" is the minimum power. Level "5" is the

maximum power. When you reach " 5 " , press the "+" button again, the interface still

shows "5", and blinks at"5"to indicate the power highest. After the power downshift

reaches "0" , press the "-" button again, the interface still shows "0" and blinks at "0"

to indicate the power minimum. The default value is level "1".

" button for 2s. The backlight brightness is

" button for 2s, the lighting can

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the KD51C-D and is the answer not in the manual?