Switching The Lighting On/Off - Key-Disp KD51C-D User Manual

Ebike display

Hide thumbs Also See for KD51C-D:

Table of Contents

■ Push-assist function may only be used while pushing the E-bike. Be aware of danger of

injury when E-bike wheels do not have ground contact.

◆Switching the Lighting On/Off

To switch on bike headlight, hold "

is automatically reduced. In the same way, hold the "

can be switched off while display backlight recover its brightness.

◆Power Assist Level Selection

Press "+" or "-" button to change the E-bike system assist level and change the motor

output power, The default assist level ranges from level "0" to level "5", The output

power is zero on Level"0" . Level"1"is the minimum power. Level"5"is the maximum

power. When you reach "5", press the "+" button again, the interface still shows "5",

and blinks at"5"to indicate the power highest. After the power downshift reaches "0",

press the "-" button again, the interface still shows "0" and blinks at "0"to indicate the

power minimum. The default value is level "1".

Push-assist Mode

" button for 2s. The display backlight brightness

Switching the Lighting On/Off Interface

" button for 2s, the bike headlight

Table of Contents

Do you have a question about the KD51C-D and is the answer not in the manual?