Switching Push-Assistance Mode On/Off; Switching The Lighting On/Off; Assistance Level Selection - Key-Disp KD51C User Manual

Switching Push-assistance Mode On/Off

◆
To activate the push-assistance function, hold the "-" button always. The E-bike's
drive is activated at a uniform speed of 6 Km/h. And "WALK" shows on the screen.
The push-assistance function is switched off as soon as you release the "-" button on
the operating unit.
Push-assistance function may only be used when pushing the E-bike. Danger of injury when
■
the wheels of the E-bike do not have ground contact while using the push- assistance function.

Switching the Lighting On/Off

◆
To switch on the lighting (headlights, taillights and display backlight), briefly press the
" " button. In the same way to press the "
switched off.

Assistance Level Selection

◆
The level of assistance of the E-bike drive when pedaling can be adjusted via the
display. The assistance level can be changed anytime, even during riding.
The default assistance level ranges from level "0" to level "5".The output power is zero
on Level "0". Level "1" is the minimum power. Level "5" is the maximum power.
To increase the assistance level, press the "+" button until the desired assistance level
is displayed; to decrease the assistance level, press the "-" button. The default value is
level "1".
Push-assistance Mode
Switching the Lighting On/Off Interface
" button again, the lighting can be