Switching Push-Assist Mode On/Off; Switching The Lighting On/Off - Key-Disp KD51C-U User Manual

◆Switching Push-Assist Mode On/Off

To activate the push-Assist function, keep holding the "-" button.
activated to go at a uniform speed of 6 Km/h while ' WALK' is shown on the display screen.
The push-Assist function is switched off as soon as you release the "-" button on the
operating unit.
▉ Push-Assist function may only be used when pushing the E-bike. Be aware of danger of injury
when the wheels of the E-bike do not have ground contact while use the push- Assist function.

◆Switching the Lighting On/Off

To switch on the lights (headlights, taillights and display backlight), press the "
button. Likewise, press the "
If the headlights or taillights are independent of "
be used as display backlight switch.
Display interface
Push-Assist Mode
" button again; the lights can be switched off.
Switch the Lighting On/Off Interface
4
The E-bike's is
" button, the " " button can only
"