Switching Push-Assist Mode On/Off; Switching The Lighting On/Off; Assist Level Selection - Key-Disp KD58C User Manual

→ Max Speed (Km/h). Each state will display for 2 seconds and then automatically
returns to current speed interface.

◆Switching Push-assist Mode On/Off

To access the push-assist mode, hold the DOWN button for 2 s, the E-bike will go
on at a uniform speed of 6 Km/h and "P" is showed on the screen at the same time. The
push-assist function is switched off as soon as you release the DOWN button.
■Push-assist function may only be used when pushing the E-bike. Be aware of
danger of injury when the wheels of the E-bike do not have ground contact.

◆Switching the Lighting On/Off

To switch on headlight of the E-bike, hold the UP button for 2 s the headlight will be
switched on while display backlight darkens.
Likewise, hold the UP button for 2 s again, the bike headlight will be switched off
while display backlight is gaining brightness.
◆assist Level options
Assist levels indicate the output power of the motor. The default value is level "1".
The default power ranges from level "0" to level "5".The output power is zero on
Level "0". Level "1" is the minimum power. Level "5" is the maximum power.
Press UP/DOW to change assist level as per your needs.
Display interface circulation
Push-assist Mode
Switch the Lighting on/off
3