General Operation; Switching The E-Bike System On/Off; Display Interface; Switching Display Interface - Key-Disp KD51C-D User Manual

Recover Default Settings
●

General Operation

◆Switching the E-bike System On/Off

Briefly press the power button to switch on the E-bike system, and provides the power
supply for the controller .To hold the power button for 2s, the E-bike system will be
switched off .The E-bike system no longer use the battery power.
When switching off the E-bike system the leakage current is less than 1 uA.
■When parking the E-bike for more than 10 minutes, the E-bike system switches off
automatically.

◆Display Interface

After switching on the E-bike system, the display will show Speed and Trip Distance.
Pressing the "i" button will show more riding data as below:
Trip Distance (Km) →Total Distance (Km)→Max. Speed (Km/h)→ Ave. Speed (Km/h)
→Ride Time (Min.) .
◆Switching Push-assistance Mode On/Off
To activate the push-assistance function, hold the "-" button always. After 2s, The
E-bike's drive is activated at a uniform speed of 6 Km/h. While the screen displays " ".
The push-assistance function is switched off as soon as you release the "-" button on
the operating unit .The E-bike system stop the power output immediately.

Switching display interface