Silicon Graphics InfiniteStorage 4000 Series System Upgrade Manual page 141

Chapter 7: Upgrade Instructions for the Windows OS
ATTENTION Possible data corruption – If the host is allowed to access data on the
storage array without RDAC or a valid installation of a path failover product, and has
dual paths to the storage array, the data might become unusable.
NOTE Before you start the primary server of a server cluster, complete all applicable
configuration procedures for each system. This version of the storage management
software does not support 64-bit versions of the Windows XP operating system. All
administrator functions using the storage management software must be performed
from a 32-bit storage management station.
Configure the Event Monitor on only one storage management station to prevent
receiving duplicate event messages. Duplicate alerts are also sent if the Enterprise
Management Window and the SMmonitor utility are running simultaneously.
NOTE Do not restart the system during the installation process. You will restart the
system after you install all of the storage management software components.
1. Are you installing the Windows boot device on a storage array?
Yes – Go to Appendix A,
—
device installation procedures to determine where to install the storage
management software After you have determined where to install the
software, return to this procedure.
No – Go to step 2.
—
2. Before installing this software, close all other programs.
3. Insert the installation CD into the CD-ROM drive.
4. From the desktop, double-click the name of the CD, such as SANSM960.
The CD window appears.
5. Open the install folder.
6. Select your operating system architecture (32-bit or 64-bit), and open the
appropriate folder.
7. To launch the installer, double-click the .exe file, such as SMIA-WS32.exe.
The InstallAnywhere dialog appears while the software installs. When the
software is installed, the Introduction window appears.
8. Click Next.
The License Agreement window appears.
9. Select the option that accepts the terms of the License Agreement.
"Boot Device Installation," and read the boot
133