Uninstalling Storage Management Software On The Linux Os - Silicon Graphics InfiniteStorage 4000 Series System Upgrade Manual

Uninstalling
Storage
Management
Software on the
Linux OS
Chapter 6: Upgrade Instructions for the Linux OS
2. At the prompt, type this command, and press Enter. In this command,
<package name> is the name of a package that you installed.
rqm -qi <package name>
3. Note any problem that is reported.
4. For each package you installed, repeat step
5. Was the installation successful (no problems were reported)?
Yes – Go to step 6.
—
No – From the /opt/StorageManager directory, review any error
—
messages from the error message log, and correct the problem. If the
problem persists, contact your Technical Support representative.
6. For each system that is used as a storage management station or host, perform the
software installation and removal procedures that are described in this chapter.
7. Start the storage management software. At the prompt, type this command, and
press Enter:
SMclient
After the client software starts, the Enterprise Management Window and these
dialogs appear:
Select Addition Method
—
Enterprise Management Window Task Assistant
—
Refer to the online help topics in storage management software for more
information about how to manage your storage array.
If you have installed the storage management software but you have determined that
you need to uninstall it, perform this procedure.
NOTE Uninstalling the software is not the same as removing previous versions of the
software.
1. To change to the Uninstall directory, from the /opt/StorageManager
directory, type this command, and press Enter:
cd "Uninstall SANtricity"
2. From the Uninstall SANtricity directory, type this command, and press
Enter:
./Uninstall_SANtricity
The Uninstall window appears.
2 through step 3.
125