Silicon Graphics InfiniteStorage 4000 Series System Upgrade Manual page 110

Hide thumbs Also See for InfiniteStorage 4000 Series:
Table of Contents

Advertisement

102
16. Does any component have a Needs Attention status?
Yes – Click the Recovery Guru toolbar button in the Array Management
Window, and complete the recovery procedure. If the problem is not
resolved, contact your Technical Support representative.
No – Go to step 17.
17. Remove the antistatic protection.
18. Gather support data about your updated storage array by using one of these
methods:
SANtricity ES
Command line interface
From the Array Management Window toolbar, select
Monitor >> Health >> Collect Support Data. Then
name and specify a location on your system where
you want to store the support bundle.
Enter the following command on the command line:
save storageArray supportData
This command gathers comprehensive support data
about the storage array. For more information about
this command, refer to Command Line Interface and
Script Commands Programming Guide. Running this
command can temporarily impact performance on
your storage array.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the InfiniteStorage 4000 Series and is the answer not in the manual?

Table of Contents