Silicon Graphics InfiniteStorage 4000 Series System Upgrade Manual page 122

114
7. At the prompt, type this command, and press Enter. In this command,
SMIA-SOL.bin is the name of the installation program on the CD.
SMIA-SOL.bin
After the software is loaded, the Introduction window appears.
8. Click Next.
The License Agreement window appears.
9. Select the option that accepts the terms of the License Agreement.
10. Click Next.
The Select Installation Type window appears.
11. The steps in this procedure describe a typical (full) installation. Based on the type
of installation you are performing, select one of these options.
Typical (Full Installation) – This selection, which is the default, installs all
—
of the packages on the system. Choose this option if you do not know which
installation type to select.
Management Station – This selection installs the software that is needed to
—
configure, manage, and monitor a storage array. This option is for your
workstation or management computer.
Host – This selection installs the storage array server software. Use this type
—
of installation for the host (server) that is connected to the storage array.
Custom – This selection lets you customize the features to be installed.
—
NOTE The target directory for installing the SMclient utility must be the root
directory of the host system. Do not try to force the installation program to install the
SMclient utility in a different location.
The selected installation type is selected in blue text.
12. Click Next.
The Pre-Installation Summary window appears.