Silicon Graphics InfiniteStorage 4000 Series System Upgrade Manual page 131

Chapter 6: Upgrade Instructions for the Linux OS
8. The steps in this procedure describe a typical (full) installation. Based on the type
of installation you are performing, select one of these options:
Typical (Full Installation) – This selection, which is the default, installs all
—
of the packages on the system. Choose this option if you do not know which
installation type to select.
Management Station – This selection installs the software that is needed to
—
configure, manage, and monitor a storage array. This option is for your
workstation or management computer.
Host – This selection installs the storage array server software. Use this type
—
of installation for the host (server) that is connected to the storage array.
Custom – This selection lets you customize the features to be installed.
—
The selected installation type is selected in blue text.
9. Click Next.
The Multi-Path Driver Warning dialog appears.
10. Click Next.
The Pre-Installation Summary window appears.
11. Click Install.
The Installing window appears while the software is loading. When the software
is loaded, the Install Complete window appears.
NOTE If you cancel an installation before the installation completes or
while the progress bar is still visible, the installation stops prematurely.
The software creates an installation log. You must manually uninstall the
software.
If you cancel the installation before the progress bar is visible, you do not
need to uninstall the software.
12. To exit the installation program, click Done.
Several files and program packages are installed to the /opt/SM9 directory and
the/opt/StorageManager directory.
13. Do you want to manually install the RDAC package?
Yes – Go to step 14.
—
No – Go to "Checking the Installation on the Linux
—
OS."
123