Patterns For Cutting - YASKAWA YRC1000 Instructions Manual

HW1483590
2

Patterns for Cutting

2 Patterns for Cutting
Five patterns, circle, rectangle (including square), ellipse, pentagon, and
hexagon are available.
The minimum and maximum set values of a pattern can be set at the
following parameters.
Parameter
S1C G63
S1C G64
The minimum and maximum values of data required for a pattern are set
as follows.
Pattern Item
Circle Radius
Rectangle Width
Height
Ellipse Radius
Width
Pentagon Radius
Hexagon Radius
Radius
Height
Circle
Radius
Pentagon
2-1
Contents
Minimum set value
Maximum set value
Minimum Value Maximum Value
S1CG63 / 2 S1CG64 / 2
1 (S1CG64 )
S1CG63 / 2 (S1CG64 )
S1CG63 / 2 (S1CG64 / 2) - (Width / 2)
0 S1CG64 - (2* Radius)
S1CG63 / 2 S1CG64 / 2
S1CG63 / 2 S1CG64 / 2
Width
R ec tan g le
Radius
Hexagon
HW1483590
Initial Value
1,000 μm
1,000,000 μm
2 2
- (Height)
2 2
- (Width)
Radius
Width
Ell ip s e
9/49