YASKAWA YRC1000 Instructions Manual page 34

5 Form Cutting Instruction
5.2 Registering Instructions
When the additional items are added or changed, press [ENTER].
The detailed editing dialog box is closes, and the job text display
opens.
To add the radius, select {UNUSED} for {RADIUS}.
A selection dialog box is displayed. Select {R=}.
Add or change any other items in the same manner.
6. Press [ADD] and then [ENTER].
– The instruction displayed in the input buffer line has been registered.
5-7
HW1483590
HW1483590
34/49