Setup - Magnum Energy ME-MR Series Owner's Manual

Setup

3.0 Setup
When the remote is connected to a Magnum inverter/charger, the settings in
the remote control determine the inverter/charger operating parameters. The
default settings in the remote control (see Table 3-4, Inverter/Charger Default
Settings) are adequate for most installations, however you have the option to
change some of the operating parameters if required. This section will show
you how to navigate the remote, give you an understanding of the function of
each adjustable setting and help you decide what setting should be used.
3.1 Navigating the Remote's Menu
The ME-MR has an internal structure that provides menu items and adjust-
able settings that provide the ability to confi gure your inverter/charger to
your specifi c parameters.
Info: See fi gure 4-1, Inverter/Charger Menu Map for a complete map
of the inverter/charger menu items and adjustable settings.
Familiarize yourself with the items on the front panel which are used to fi nd,
adjust and save the desired setting. They are:
• LCD Display - The bottom line of the LCD display shows the menu items,
adjustable settings or the meters display information.
Info: The bottom line of the LCD display returns to the Home
Screen to show DC voltage and current (see Figure 3-1) after 30
Seconds - if no buttons have been pressed.
Info: When the "←" (left facing arrow) symbol is shown on the dis-
play, it indicates that the displayed setting has been selected and
will be used.
• Menu Pushbutton - Allows simple access to the menu items that can
help with confi guring, monitoring and troubleshooting your inverter/charger
system.
• Change Pushbutton - This button allows you to quickly scroll through
and select various menu items and settings after pressing the menu pushbut-
ton.
• Save Pushbutton - This button saves the menu item displayed on the
screen. A saved setting is indicated by arrow symbol.
6 ©2009 Magnum Energy Inc.