Magnum Energy ME-MR Series Owner's Manual page 6

Setup
Remote Side view
Figure 2-1, Flush Mount Remote Cut-Out Dimensions
After selecting the desired location for Flush mounting the remote cutout a
mounting hole measuring 2 3/8" x 2 3/8". Mount the remote into the cutout
and use the remote to mark and predrill 2 holes for the 6 x 1/2" phillips fl at
head mounting screws.
Bezel Side view
Figure 2-2, Surface Mount Bezel Dimensions
After selecting the desired location for the Surface Mount Bezel mount the
Bezel using the Bezel as a template. Mark and predrill 4 1/8" holes. Mount
the Bezel using the four #6 x 3/4" screws. Next mount the remote to the
Bezel using the two #6 x 1/2" Phillips fl at head screws.
4
Remote Back View
Bezel Front view
©2009 Magnum Energy Inc.