Magnum Energy ME-MR Series Owner's Manual page 17

• SETUP: 08 Power Saver
Power Saver™ feature.
Default setting: Pwr Save = On
What is the Power Saver
the LCD backlight and LED's on the remote display to turn off to conserve
energy. The remote goes into Power Saver
pushbutton press or fault message for 15 minutes. Whenever the remote
goes into the Power Saver
reactivated by pressing any menu pushbutton. If you have a fault during
the Power Saver mode, the LCD backlight and Fault LED will come on and
stay on as long as the fault is detected. If you want the LCD backlight and
LED's to always be on, you will need to turn the Power Saver feature off by
selecting PwrSave = Off.
B o tto m lin e sh o w s
cu r r e n t " sa ve d " se ttin g
PWR SAVE
M EN U
H O M E
If th is se ttin g is co r r e ct , p r e ss
m e n u b u tto n to a cce ss
d iffe r e n t m e n u ite m s
p r e ss
Figure 3-8, SETUP: 06 Power Saver
• SETUP: 09 Equalize - This setting allows you Equalize the batteries
after a Float Charge is achieved. Equalize is a controlled overcharge of the
batteries and should only be attempted by experienced users.
Default setting: Equalize = Disabled
B o tto m lin e sh o w s
cu r r e n t " sa ve d " se ttin g
EQUALIZE
M EN U
Disabled
H O M E
If th is se ttin g is co r r e ct , p r e ss
m e n u b u tto n to a cce ss
d iffe r e n t m e n u ite m s
p r e ss
Figure 3-9, SETUP: 08 Equalize Selections
What is the Equalize? Equalize is a controlled overcharge of the batteries.
There will be excessive gassing of the batteries during the Equalize process.
This condition is corrosive and emits dangerous hygrogen gasses during the
charging process.
Warning: Only Equalize in well ventilated areas. Consult
your battery manufacturer for recommendations on Equalizing
batteries.
Info: Equalization charging is not available if GEL or AGM 2 is selected
under the SETUP: 04 Battery Type menu.
©2009 Magnum Energy Inc.
- This setting allows you to turn on/off the
TM
feature? The Power Saver
TM
mode, the LCD backlight and LED's can be
TM
If a d iffe r e n t se ttin g is
On
PWR SAVE
.......
Off
Selections
TM
If a d iffe r e n t se ttin g is
EQUALIZE
.......
Disabled
feature causes
TM
mode if there hasn't been a
TM
T o sa ve th e cu r r e n t
r e q u ir e d : se ttin g d isp la ye d :
O N / O F F
C H A N G E
p r e ss
PWR SAVE
On
r e q u ir e d :
O N / O F F
C H A N G E
p r e ss
EQUALIZE
Requested
Setup
SA VE
H O L D
p r e ss
T o sa ve th e cu r
se ttin g d isp la ye
SA VE
H O L D
p r e ss
15